Cutter Rig by Selden with in mast furling mainsail
Furlex furling yankee to forestay and furlex furling self tacking staysail to inner forestay
White painted mast, boom and vang
White painted spinnaker pole.
Rig to have diamond jumpers in addition to running backstays
Cockpit lights mounted in underside of boom, switched from steering binnacle
Twin spreader lights in addition to mast mounted standard deck light
Dyform low stretch stainless steel wire standing rigging, in place of standard 1x19
Cruising chute including halliard, spectra sheet, tack and blocks, tack line led aft to coachroof winch
Padded luff to Yankee
The rig configuration is a cutter rigged masthead arrangement with white painted aluminium spars. The rig geometry utilizes triple aft swept spreaders with cap shrouds, upper and lower intermediates, aft lower shrouds, forestay, inner forestay and backstay. Running rigging comprises mainsail, Yankee and staysail halliards terminating on Antal halliard adjuster tracks on the mast, with one interchangeable tail led back to the cockpit. Mainsail clew outhaul and self-tacking staysail sheet, which runs through the mast, are led aft to cockpit. Mast is keel stepped, the heel fitting landing on a stainless steel shoe bridging across two hardwood
Mainsail is in mast furling and configured with full-length vertical battens to improve mainsail shape and control and give the ability to support a
mainsail roach, a clew block is fitted and the clew UV protected. Yankee and Staysail: Manufactured polyester sailcloth, with leech and foot lines, tell tails, UV strip in white acrylic and sail bag.
Sail area (100% FT) 166.86m2 1,794 sq. ft.
I 24.00m 78’8”
J 7.50m 24’7”
P 21.50m 70’6”
E 7.15m 23’5”